Installation Manual

ManualsBrandsPioneer ManualsAutomobile- In-Dash iPhone® and Android™ Compatible Car Receiver with 7" Capacitive Multi-Touchscreen, Bluetooth®, MirrorLink™, and On-Screen Access to Compatible Apps

Connecting the system

Chapter

Connecting the power cord (1)





















Yellow

To terminal supplied with power regardless

of ignition switch position.

Notes

• When a subwoofer is connected to this

product instead of a rear speaker,

change the rear output setting in the

initial setting. (Refer to the Operation

Manual.)

• The subwoofer output of this product is

monaural.

This product

Fuse (10 A)

Power cord

Blue/white

To auto-antenna relay control terminal.

If the vehicle has a glass antenna, connect to the

antenna booster power control terminal (max. 300

mA 12 V DC).

Red

To electric terminal controlled by ignition

switch (12 V DC) ON/OFF.

Orange/white

To lighting switch terminal.

Black (ground)

To vehicle (metal) body.

With a two-speaker system, do not connect

anything to the speaker leads that are not

connected to speakers.

Front speaker

White

White/black

Gray

Gray/black

Front speaker

Left

Rear speaker or

subwoofer (4 Ω)

Green

Green/black

Violet

Violet/black

Right

When using a subwoofer of 70 W (2 Ω), be sure to connect with the violet and violet/black leads of this

product. Do not connect anything with the green and green/black leads.

Not used.