User Manual
(1*/,6+
%DVLF2SHUDWLRQ
8VLQJQDYLJDWLRQDQG6285&(6VLPXOWDQHRXVO\
An announcement is made by the guide audio as necessary. In the case the name of
the course changes, although the display will switch to the navigation display, it will
automatically return to the SOURCE display.
62)7.(<RSHUDWLRQ
In this manual, for operations using the multifunction buttons the function displayed
is used as the name of the function button.
The “ ” indicator shows that the multifunction buttons have functions other than those
currently displayed. When this indicator is visible, press
to switch through the
functions of the multifunction buttons.
The number of functions or displays switched through will differ according to the source or
menu selected.
When no function is indicated for a button, that button is not currently active.
If SOURCE is pressed after having
set the destination during navigation,
the SOURCE display and navigation
information are displayed
simultaneously.
Function names “ ”
Multi-function buttons
SOFT KEY operation means that the
function of a button changes as
indicated on the display. The multi-
function buttons provide SOFT KEY
operation; the functions performed by
the buttons change according to the
function or setting that has been
selected.
Press repeatedly to switch
between the following functions:
Here the “random play” function of the built-in CD player is used as an example to
illustrate operation of the multifunction buttons.
Press again to turn random play off. The light goes off.
When the function menu is exited, the functions of the multifunction buttons also
change simultaneously.
You can also turn random play on or off by pressing or in the random mode.
If you do not operate the function within about 30 seconds, the display is automatically
returned.
Press repeatedly until “FUNC”
appears.
With the switch to the function menu,
the functions of the multifunction
buttons also change simultaneously.
The light illuminates.
MAN-ANH-P9R-GB.fm Page 10 Tuesday, June 4, 2002 1:39 PM