User guide

Multi-CD Player
En
08
Section
70
Selecting a disc directly
You can use the buttons 1 – 6 (or 7 – 12) to se-
lect a disc directly.
1Press NEXT until “1” – “6” (or “7” –
“12”) appears.
2Press any of the buttons 1 – 6 (or 7 –
12) to select a disc located at 1 to 6 (or 7 to
12).
Note
You cannot display “7” – “12” when a 6-disc mul-
ti-CD player is connected.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
This product is not designed to operate disc ti-
tle list functions with a 50-disc multi-CD play-
er. About the disc title list funtions, please
refer to Selecting discs from the disc title list
on page 72.
Advanced multi-CD player
operation
Multi-CD player function menu
The multi-CD player function menu has the
following functions:
RPT (repeat play)
RDM (random play)
SCAN (scan play)
T.LIST (track title list)
D.LIST (disc title list)
PAUSE (pause)
TTLin (disc title input)
COMP (compression and DBE)
ITS.P (ITS play)
ITS.M (ITS programming)
1Press FUNC to display the function
names.
2To return to the playback display, press
BAND/ESC.
Notes
• If you do not operate the function within
about 30 seconds, the display is automatical-
ly returned to the playback display. (When
you select the disc title input mode (“TTLin”)
or ITS programming mode (“ITS.M”), the dis-
play is not returned automatically.)
•“T.LIST” is displayed only when playing a CD
TEXT disc on a CD TEXT compatible multi-CD
player.