User guide

06
Section
Built-in CD Player
59
En
English
Selecting tracks from the
track title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of
them for playback.
1Press FUNC and then press T.LIST to se-
lect the track title list mode.
2Press NEXT until the desired track title
appears.
3Press the corresponding number but-
ton to select the desired track title.
That selection will begin to play.
Notes
• You can also use 

, 

and 

(or NAVI/OK) to
select and play the desired track title.
• Only when playing a CD TEXT disc on the
built-in CD player or a CD TEXT compatible
multi-CD player, you can switch to this
mode.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1Press FUNC and then press PAUSE to
select the pause mode.
2Press PAUSE to turn the pause on.
The light illuminates. Play of the current track
pauses.


To turn the pause off, press PAUSE again.
Notes
• You can also turn pause on or off by pressing
PAUSE in the following display.
• When the pause mode is exited while pause
is on, “PAUSE” is displayed in the basic dis-
play.
Using compression and
BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
has a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1Press FUNC and then press NEXT.
2Press COMP to select COMP mode.