User guide

Tuner
En
04
Section
48
Advanced tuner operation
Tuner function menu
The tuner function menu has the following
functions:
BSM (best stations memory)
LOC (local seek tuning)
AF (alternative frequencies search)
PTY (programme type selection)
REG (regional)
FM
MW/LW
1Press FUNC to display the function
menu.
2To return to the frequency display,
press BAND/ESC.


If MW/LW band is selected, you can only se-
lect “BSM” or “LOC”.
Note
• “AF”, “PTY” and “REG” are RDS functions
for FM bands. See Selecting alternative fre-
quencies
on page 51, Using PTY functions
on page 53 and Limiting stations to regional
programming
on page 52.
• If you do not operate the function within
about 30 seconds, the display is automatical-
ly returned to the frequency display.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall with the touch of a
button.
1 Find a frequency that you want to
store in memory.
2Press NEXT until “1” - “6” appears.
3Press a preset tuning button 1 – 6 and
hold until the preset number stops flash-
ing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected radio station frequency has been
stored in memory.
4Press the same preset tuning button 1
– 6.
The radio station frequency is recalled from
memory.
Notes
• This product’s AF (alternative frequencies
search) function can be turned on and off. AF
should be off for normal tuning operation (re-
fer to Selecting alternative frequencies on
page 51).
• Up to 18 FM stations, 6 for each of the three
FM bands, and 6 MW/LW stations can be
stored in memory.
• You can also use 

and 

to recall radio sta-
tion frequencies assigned to preset tuning
buttons 1 – 6.