User guide

04
Section
47
En
English
Tuner
Listening to the radio
These are the basic steps necessary to oper-
ate the radio. More advanced tuner operation
is explained starting on the next page.
 Preset number indicator
Shows what preset has been selected.
 LOC indicator
Shows when local seek tuning is on.
 Stereo ( ) indicator
Shows that the frequency selected is being
broadcast in stereo.
 Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
 Frequency indicator
Shows to which frequency the tuner is
tuned
.
Operation
1Press SOURCE until “Tuner” appears.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is
displayed, FM–1, FM–2, FM–3 for FM or MW/
LW.
4To perform manual tuning, press 

or


with quick presses.
The frequencies move up or down step by
step.
5To perform seek tuning, press and hold


or 

for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception
is found.


You can cancel seek tuning by pressing either


or 

briefly.


If you press and hold 

or 

you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Notes
• After choosing your destination, press INFO
and you can listen to the guide voice during
navigation guidance.
• When new traffic information arrives,
appears. If desired, check the new informa-
tion.


 
