Installation Instructions

When installing the aerial outside the vehicle (on the body) (Fig. 12)

Put the GPS aerial in a position as level as possible, such as on the roof or boot lid. (The GPS aerial is

fastened with a magnet.)

Fig. 12

Clamps

Use clamps to

secure the lead

where necessary

inside the vehicle.

Clamps

Use clamps to secure the

lead where necessary

inside the vehicle.

GPS aerial

When routing the lead in from the top of

the door

Make a U-shaped loop in the lead

on the outside to prevent

rainwater from flowing along the

lead into the interior of the vehicle.

When routing the lead in from inside the boot

Waterproof pad

Make sure the waterproof

pad contacts the top of the

rubber packing.

Make a U-shaped loop in

the lead outside the rubber

packing to prevent rainwater

from flowing along the lead

into the interior of the

vehicle.

Rubber packing

Installation