STEREO AMPLIFIER A-307R A-209R Operating Instructions 1
Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However, the method of connecting and operating the unit is the same.
CONTENTS FEATURES ......................................................................... 3 OPERATIONS .................................................................... 9 INSTALLATION .................................................................. 3 REMOTE CONTROL ........................................................ 10 CONNECTIONS ................................................................. 4 TROUBLESHOOTING ...................................................... 11 PANEL FACILITIES ..
CONNECTIONS Before making or changing the connections, switch off the power switch. Cassette deck/ CD recorder/ MD recorder CD player Adaptor component (graphic equalizer, etc.
CONNECTIONS CONNECTING THE INPUT/OUTPUT CORDS Connect the white plug to the L (left) channel, and the red plug to the R (right) channel. Be sure to push the plugs securely. Left channel Right channel R Open the battery compartment cover on the back of the remote control unit. Insert size AA/R6P dry cell batteries into the battery compartment in accordance with the indications (ª,·) inside the compartment. Close the cover of the battery case. Incorrect use of batteries may lead to leakage or rupture.
PANEL FACILITIES [ FRONT PANEL ] 1 2 POWER Î 3 STEREO AMPLIFIER z¿≤?≥B Direct Energy MOS 4 5 VOLUME CD TUNER PHONO LINE TAPE 1 /MD TAPE 2 MONITOR — OFF _ ON BASS A SPEAKERS B TREBLE BALANCE PHONES LOUDNESS – + – ~ = - 0 + 9 DIRECT MIN 8 TAPE 2 MONITOR L MAX 7 INPUT SELECTOR R 6 The illustration shows the A-307R. 1 POWER (— OFF/_ ON) switch 5 TAPE 2 MONITOR button/indicator Press to turn power to the unit ON and OFF.
PANEL FACILITIES 7 DIRECT button/indicator 0 BASS tone control Use this button when you do not wish to pass the output from input terminal equipment through the various frequency adjusting circuits (BASS, TREBLE, BALANCE, LOUDNESS). On : The indicator lights: The signals passing through the input terminals are reproduced without passing through the various frequency adjusting circuits. This results in flat, pure sound which is a more faithful reproduction of the input source.
PANEL FACILITIES [ REAR PANEL ] 1 23456789 0 - SPEAKERS B R SIGNAL GND PHONO TUNER CD LINE TAPE 1/MD REC PLAY L TAPE 2 MONITOR REC · ª PLAY L L R R · ª AC INLET CONTROL OUT IN IN IN IN OUT IN OUT IN R = A L ~ ! @ The illustration shows the A-307R.
OPERATIONS BEFORE BEGINNING OPERATIONS 1. Set the VOLUME control to minimum. 2. Set the POWER switch to ON. 3. Press the SPEAKERS button corresponding to the speaker system to be used. 4. Set the BALANCE control to the center position. 5. Set the DIRECT button to off. 6. Set the TAPE2 MONITOR button to off. PLAYBACK PROCEDURES 1. Set the INPUT SELECTOR knob to the desired playback source. ÷ ÷ ÷ ÷ For playback of a compact disc: Set to [CD]. For reception of an AM/FM broadcast: Set to [TUNER].
REMOTE CONTROL 7 1 2 3 4 STANDBY/ON DECK Ι 4 5 6 CD TUNER TAPE 2 7 3 TAPE SELECT DISC SELECT DECK ΙΙ ¢ – TAPE 1 7 STATION ¡ CD 3 + TUNER CD TUNER PHONO TAPE 1 TAPE 2 LINE 8 9 0 - + VOLUME = – STEREO AMPLIFIER REMOTE CONTROL UNIT Î 1 CD POWER button 7 TUNER POWER button Switches CD player power ON/OFF. Switches TUNER power ON/OFF. 2 TAPE SELECT button 8 TAPE POWER button Selects the cassette No. (1 to 6) for multi-cassette changer.
TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your dealer to carry out repair work. Symptom No power supplied to unit.
SPECIFICATIONS Amplifier Section Continuous power output (both channels driven at 20 Hz to 20 kHz)** [A-307R] T.H.D. 0.1 %, 8 Ω .................................... 45 W + 45 W* T.H.D. 0.15 %, 4 Ω .................................. 65 W + 65 W* [A-209R] T.H.D. 0.1 %, 8 Ω .................................... 35 W + 35 W* T.H.D. 0.15 %, 4 Ω .................................. 45 W + 45 W* DIN Continuous power output (both channels driven at 1 kHz) [A-307R] T.H.D. 1.0 %, 8 Ω ....................................
