User Manual

20
03
Section
En
Operating this unit
Select “PHOTO”, press [M.C.] or [ENTER]
button shown as below:
Unit does not support photo browsing,
Please play the iPod photo by controlling
iPod.”
* During video and photo playback, press
button “ESC will exit video mode, and
return back to the ipod video playlist or
ipod main menu.
Title : Unknown Title
Artist : Unknown Artist
Album : Unknown Album
EQ USER
Playback information
EQ indicator
Playback status
Elapsed time/Total time
Stop playback temporarily
- During playback, press [ BAND ] or
[ ] button to pause playback.
- The sound will be muted.
- Press [ BAND ] or [ ] again to
continue playback.
Select desired track/chapter
- Press [ ] (Left) / [ ] (Right) or [ ] /
[ ] button to skip to the previous/next
track/chapter.
Fast forward/backward
Press the [ ] (Left) / [ ] (Right) button on
the front panel for more than 2 seconds
to fast backward or forward track during
playback.
- During the fast forward or backward
operation, press [ BAND ] or [ ]
briey to playback normally again.
- During the fast forward or backward
operation, the volume will be muted.
Control an iPod/iPhone from its
unit (Control iPod mode)
- Press and hold [ BAND ] to switch
to the Control iPod mode.
- With this mode, an option cable like the
CD-IU51V is required to input video and
analog signal to the front AUX terminal.
Note
The iPod or iPhone couldn't be charged
through the unit after the unit turned off.
System setup
In all mode, press and hold [SEL] to enter
system setting menu.
The unit could not enter the setting menu
when the system is busy, such as loading
disc or USB.
1 Press [ • ] (Left) / [ • ] (Right) or [ ] / [ ]
button to select category.
2 Rotate [M.C.] or press [ ] (Up) / [ ]
(Down) or [ ] / [ ] button to select a
number, press [M.C.] or [ENTER] button
to select options, then press the [M.C.] or
[ENTER] button to spread the sub-menu.
3 Rotate the [M.C.] or press [ ] (Up) / [ ]
(Down) or [ ] / [ ] button to highlight
the desired selection, press [M.C.] or
[ENTER] to conrm.
Pressing [ ] will return to upper
catalog.
Setting menu
SETTING
Time
Category
Options
Sub-menu