Installation & Assembly

3
REV-01 14, 13
Faucet Installation
Slide the base plate (A) to the underside of the faucet.•
Apply adequate plumbers putty or sealant along the boundary of •
the base plate (A) if necessary.
Clean the mounting surface If necessary.•
Insert the faucet through sink hole.•
Thread the mounting bolt (B) into the faucet from beneath.•
Slide the mounting plate (C) through the mounting bolt.•
Thread the mounting nut (D) from underside. Secure the faucet to the •
sink with mounting nut (D) supplied with the faucet.
Remove the excess plumbers putty or sealant from the faucet.•