Installation & Assembly

3
REV-11 19, 12
Faucet Installation
Slide the base plate (A) to the underside of the faucet. Apply adequate 1.
plumbers putty or sealant along the boundary of the base plate (A).
Thread the mounting bolt (B) to the deck plate (D) from underside. 2.
Clean the mounting surface. If necessary, insert the faucet through sink
hole. Thread the mounting nut (C) from underside. Secure the faucet to
the sink with mounting nut (C) supplied with the faucet. For 2LG162 &
2LG172 only install the mounting bolt (B) and mounting Nut (C) on left
side. For all the other ensure the mounting bolt (B) and mounting nut (C)
are installed on both side.
Remove the excess plumbers putty or sealant from the faucet.3.