Installation & Assembly

3
REV-11 19, 12
Faucet Installation
Place base plate underneath the faucet.•
Apply adequate amount of plumbers putty or sealant underneath the •
base plate.
Lead the faucet Inlet (B) through the mounting surface. Make sure the •
‘Pioneer’ logo face toward the front and ensure that handles turns in
correct direction.
Slide the mounting washers (C) through faucet inlet (B). •
Thread and hand tighten the mounting nut (D) through the faucet inlet •
(B). Make sure both side mounting nuts (D) are securely tighten.
For the faucet with side spray, apply adequate amount of plumbers putty •
or sealant along the boundary of the side spray ange (F). Place the
hose guide (G) through the sink hole.
Hand tighten the locknut (H) from underneath of the sink.•
Insert the side spray and hose (E) through the hose guide (G)•
Thread the hose (E) to the side spray port (I). Do not overtighten.•