Download

Basic playback
3
3
21
2
31
4
• Stations are stored in stereo. When the station is stored in
the FM MONO mode, it shows as ST when recalled.
Listening to station presets
You will need to have some presets stored to do this. See
Saving station presets
on page 20 if you haven’t done this
already.
…
Press PRESET +/– to select the station preset you
want.
Naming preset stations
For easier identification, you can name all of your preset
stations.
1
Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2
Press EDIT twice.
The cursor at the first character position is blinking on
the display.
3
Input the name you want.
Choose a name up to eight characters long.
• Use PRESET +/– to select character position.
• Use TUNE +/– to select characters.
• The name is stored when ENTER is pressed.
Tip
• To erase a station name, follow steps 1 and 2, and press
ENTER while the display is blank. Press EDIT while the
display is blank, to keep the previous name.
• Once you have named a station preset, Press DISP to
show the name. When you want to return to the frequency
display, press
DISP several times to show the frequency.
VSX-531_CDC_En.book 21 ページ ２０１６年２月４日 木曜日 午後４時１７分