User manual
Home menu 15
43
Chapter 15:
Home menu
The HOME MENU button on the remote control can be used
to perform a variety of settings for the unit.
Automatically switch power to
standby mode (Auto Power Off)
The unit can be set to automatically change to standby mode
if it does not receive any signal or control input for 20 minutes.
The factory setting is ON.
1 Press
HOME MENU
.
The currently selected input will be displayed on the display.
2 Press
/
to select “
Auto Power Down
”,
then press
ENTER
.
3 Press
/
to select “
ON
“ or “
OFF
“, then
press
ENTER
.
Setting Network Standby mode
When Network Standby mode is ON, the start up sequence
for the unit will be shortened. Furthermore, if AirPlay, DLNA
or BT AUDIO playback is started while the unit is in this mode
then power to the unit will automatically come on.
When set to Network Standby mode, power consumption
during Standby will be increased when compared to normal
Standby mode.
The factory setting is ON.
1 Press
HOME MENU
.
2 Press
/
to select “
Network Standby
”,
then press
ENTER
.
3 Press
/
to select “
ON
“ or “
OFF
“, then
press
ENTER
.
Check network settings
Check the status of current network settings.
1 Press
HOME MENU
.
2 Press
/
to select “
Network INFO
”, then
press
ENTER
.
3 Press
/
to select the item you wish to
check, then press ENTER.
Check software version
Can check the current software version.
1 Press
HOME MENU
.
2 Press
/
to select “
Software Version
”,
then press
ENTER
.
To go back one step, press HOME MENU or RETURN.
Software Update
Use this procedure to update the unit’s software and check
the version. There are two ways to update: via the Internet and
via a USB memory device.
Updating via the Internet is performed by accessing the file
server from the unit and downloading the file.
This procedure is only possible if the unit is connected to the
Internet.
Updating via a USB memory device is performed by
downloading the update file from a computer, reading this file
onto a USB memory device then inserting this USB memory
device into the USB port on the unit’s front panel. With this
procedure, the USB memory device containing the update file
must first be inserted into the USB port on the unit’s front
panel.
• If an update file is provided on the Pioneer website,
download it onto your computer. When downloading an
update file from the Pioneer website onto your
computer, the file will be in ZIP format. Unzip the ZIP file
before saving it on the USB memory device. If there are
any old downloaded files or downloaded files for other
models on the USB memory device, delete them.
http://www.pioneerelectronics.com
• If an update file does not exist in the Pioneer’s website,
updating the software for the unit is not necessary.
Important
• DO NOT unplug the power cord during updating.
• When updating via the Internet, do not disconnect the
LAN cable. When updating via a USB memory device, do
not disconnect the USB memory device.
• If updating is interrupted before it is completed, start
updating over from the beginning.
• The unit’s settings may be reset when the software is
updated. Information on the models for which the
settings are reset is provided on the Pioneer website.
Check the website before updating.
SBX-B70D.book 43 ページ ２０１５年４月１３日 月曜日 午後２時６分