User manual

Using the tuner12
36
To recall a memorized station
1 Press PRESET / to select the desired
station.
To scan the preset stations
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press and hold PRESET / .
The preset number will appear and the programmed stations
will be tuned in sequentially, for 5 seconds each.
2 Press PRESET / again when the desired
station is located.
To erase entire preset memory
1 Press TUNER on the remote control.
2 Press
CLEAR until “ MEMORY CLEAR ”
appears.
Note
• All stations will be erased.
Listening to the DAB+
About DAB+ (Digital Audio
Broadcasting)
Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more stations
(services). Each station contains a primary service and there
may be one or more secondary services. This allows several
programmes or services to be transmitted on a single
frequency.
Auto Scan
When turned on for the first time, the unit scans radio
stations automatically to create a station list. You can make
the auto scan again when you move the unit to other areas or
add multiplex channels to the station list.
1Press TUNER on the remote control or INPUT
SELECT
repeatedly on the main unit to select
DAB input.
2 Press DAB SCAN on the remote control for
more than 3 seconds.
Auto Scan scanning begins.
After the scan:
The stations will be stored in alphanumeric order and the first
station on the list will be selected and you will hear it through
the speakers.
• To listen to other stations, see Selecting a station in the
station list below.
Note
• If no station is found, “NO SIG” appears.
• Up to 100 appears for total received stations.
Selecting a station in the station list
Once a DAB+ station is received, you can select stations in
the station list.
1 Press the TUNER until “DAB” appears on the
display.
2 Whilst receiving a DAB+ station, press the
TUNE / to select the desired station.
3 Within 10 seconds, press the
DAB ENTER on
the remote control to tune into the desired
station.
DAB + SIGNAL
MULTIPLEX
(ENSEMBLE)
SERVICES
SERVICES
COMPONENTS
(STATIONS)
SBX-B70D.book 36 ページ ２０１５年４月１３日 月曜日 午後２時６分