User manual

Using the tuner 12
35
Chapter 12:
Using the tuner
Listening to the radio broadcasts
The following steps show you how to tune in to FM radio
broadcasts using the automatic (search) and manual (step)
tuning functions. Once you are tuned to a station you can
memorize the frequency for recall later. See Saving station
presets below for more on how to do this.
Tuning
1 Press the  STANDBY/ON to turn
the power on.
2 Press
TUNER on the remote control or INPUT
SELECT
repeatedly on the main unit to select FM
input.
3 Press
TUNE / on the remote control to
tune in to the desired station.
Automatic tuning:
Press and hold TUNE /, scanning will start automatically
and the tuner will stop at the first receivable broadcast
station.
Manual tuning:
Press the TUNE / repeatedly to tune in to the desired
station.
Note
• When radio interference occurs, automatic tuning may
stop automatically at that point.
• Automatic tuning will skip weak signal stations.
• To stop the automatic tuning, press .
To receive an FM stereo transmission:
•Press AUDIO to select stereo mode and “AUTO” will be
displayed.
Improving poor FM reception:
1 Press AUDIO repeatedly to select MONO.
This will change the tuner from stereo to mono and usually
improve the reception.
Saving station presets
If you often listen to a particular radio station, it’s convenient
to have the unit store the frequency for easy recall whenever
you want to listen to that station (Preset tuning). This saves
the effort of manually tuning in each time. This unit can
memorize up to 30 stations.
1 Tune to a station you want to memorize.
See Tuning for more on this.
2 Press MEMORY .
The preset number will flash.
3 Press PRESET / to select the preset
channel number.
4 Press
MEMORY to store that station in
memory.
If the preset number has changed from flashing to lighting,
before the station is memorized, repeat the operation from
step 2.
• Repeat steps 1 to 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorized for that
preset channel number will be erased.
Note
• The backup function protects the memorized stations for
a few hours should there be a power failure or the AC
power cord become disconnected.
SBX-B70D.book 35 ページ ２０１５年４月１３日 月曜日 午後２時６分