User's Manual

DASH User Guide
33
any external power supplies (i.e. AC adapter).
2.2.4. Starting Your System
The Power/Resume button is found on the left side of the Tablet PC. Press
the Power/Resume button to start your system and check that if the Power
LED turns on.
After a few seconds, the system’s display will turn on and your system will
begin to execute the Power On Self Test or POST to check if all system
components are running properly. Any error found during the test will be
displayed on the screen.
After the test, the screen will also display a message "press <F2> to enter
SETUP". You don’t need to run this program at the moment as your dealer
already made the necessary settings for your computer optimal operation.
After the test has completed, your computer will start to search and boot up
the operating system from your hard drive.