Installation Guide
3
REV-12 13, 12
Handheld Showerset Installation
Determine the installation location for the handheld slide bar. 1.
Drill 1/4” diameter hole as shown in the drawing. (Dimension A For 2.
6DM400,6AM400-25-1/8”, For 6MT400-26”) Place plastic anchors
screws(B)intothedrilledholesusinghammertotapitinushwiththe
wall. Place the mounting plate(A) and secure them on wall with the
help of mounting screws.
Place the slide bar mount(C) on the mounting plate(A). Tighten the 3.
screw on the bottom of the slide bar mount.
5. Place slide bar(D) to the bottom of the slide bar mount(C). Place the
bottom slide bar mount(C) on the mounting plate(A). Tighten the screw
on the bottom of the slide bar mount(C). Align the notch on the slide
bar so it will face toward the back on the bottom of the slide bar mount.
Tighten the screw on the bottom slide bar mount(C) with 3/32” size
allen wrench.