Installation Guide

REV-11 19, 12

Valve Installation

13. Ensure that Hot and cold side stems are turning in correct direction.

Connect the valve assembly inlets to water supply tubes ( left is hot

water supply and right is cold water supply). Do not overtighten the

hose with adjustable wrench as it may damage the valve assembly.

14. Turn on the hot and cold water supply. Check for any leaks at all the

connections.

15. Remove the test plug. Turn on the both handles make sure there is

appropriate amount of water coming from the shank.

16. Turn off the handles. Reinstall the test plug.

17.Installtheguards.Installthenisheddeckmaterial.Removethe

guards. Install the faucet trim according to the packed installation

instructions.

For more care information or trouble shooting inquiries about your

Pioneer Product, please see the contact information on the back page.