Installation Guide

REV-11 19, 12

Valve Installation

Determine Hole Location :- This valve is designed for 8” to 20” center 1.

widespread installation. So decide the Location of the mounting hole

withinthatrange.DeterminetheD1dimensionfromthespecication

sheet for the desired trim set and add minimum 1/2” clearance from the

ledge.

For All Installation : - Refer to the drawing the required valve height from 2.

nisheddeckis1-3/4”andmaximumdeckthicknessis2”andshank

heightis1-3/8”.Note:-extensionkitisavailableforthickerDeck.Drill

three 1-1/2” diameter holes.