Installation Guide

REV-11 19, 12

Faucet Installation

9. Removethepop-upstopper(N)andpop-upange(O)fromthepop-up

assembly.

10. Apply adequate amount of plumbers putty underside of pop-up

ange(O).Theninsertpop-updrainassemblyfromundersideofthesink

andsecurethepop-upange(O)fromthetop.

11. Rotate the drain body so that horizontal rod hole faces back of the fau-

cet. Hold the pop-up assembly in place and tighten the locknut(P).

12. Remove the excess putty. Connect the trap(Q). (check manufacturer’s

instructions for installation)