User Manual

140
Setup
SourceSource
 Input Volume Absorber
Adjust the volume level when there are differences in volume level among
multiple devices connected to this unit. Select the input selector to make the
setting.
 Input Volume Absorber (Default Value: 0.0 dB)
Select a value between "-12.0 dB" and "+12.0 dB". Set a negative value if the
volume of the target device is larger than the others and a positive value if
smaller. To check the audio, play back the connected device.
• This function is not effective in Zone 2/zone 3.
 Name Edit
Set an easy name for each input. The set name appears on the main unit’s
display. Select the input selector to make the setting.
 Name Edit (Default Value: Input name)
1. Select a character or symbol with the cursors, and press ENTER.
Repeat this operation to input up to 10 characters.
"A/a": Switches between upper and lower cases. (Pressing MODE on the
remote controller also toggles between upper and lower cases)
"←" "→": Moves the cursor in the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
• Pressing CLEAR on the remote controller will remove all the input
characters.
2. After inputting, select "OK" with the cursors, and press ENTER.
The input name will be saved.
To restore the name to the default value, press CLEAR on the remote
controller on the input screen. Then while nothing is entered, select "OK", and
press ENTER.
• To name a preset radio station, press TUNER on the remote controller, select
AM (North American, Australian and Asian models)/FM, and select the preset
number. (Preset names cannot be given to DAB stations (European models))
• This cannot be set if the "NET", "USB" or "BLUETOOTH" input is selected.