User Manual

13
DisplayDisplay
5
F
G
1
2
34
HI
J
A / / / : These may light when performing
operations while "NET" or "USB" is selected
with the input selector. / light when there are
multiple folders or les that are available to be
selected. / light when text information does
not t with the range provided by "8".
B Lights in the following conditions.
Z2/Z3: ZONE 2/ZONE 3 is on.
: Connected by BLUETOOTH.
: Connected by Wi-Fi.
NET: Lights when connected to the network with
the "NET" input selector. It will blink if incorrectly
connected to the network.
USB: Lights when the "USB" input selector is
selected, a USB device is connected and the
USB input is selected. It will blink if the USB
device is not properly connected.
HDMI: HDMI signals are input and the HDMI
input is selected.
DIGITAL: Digital signals are input and the digital
input is selected.
C Lights according to the type of input digital audio
signal and the listening mode.
D Lights in the following conditions.
RDS (European, Australian and Asian models):
Receiving RDS broadcasting.
TUNED: Receiving DAB (European models)/AM
(North American, Australian and Asian models)/
FM radio
STEREO: Receiving FM stereo.
SLEEP: Sleep timer is set. ( →p144)
AUTO STBY: Auto Standby is set. ( →p144)
E Displays the audio output destination.
A: Outputs audio only to ZONE A.
B: Outputs audio only to ZONE B.
AB: Outputs audio to both ZONE A and ZONE B.
F Lights when headphones are connected.
G Blinks when muting is on.
H Displays various information of the input signals.
I Lights when adjusting the volume.
J Speaker/Channel display: Displays the output
channel that corresponds to the selected
listening mode.