User Manual

117
Setup
Hardware
 Output Zone (Default Value: Main)
Select the zone where you want to listen to the music.
• To use this function, set "Input Selector" beforehand.
Main Outputs audio only to the main room (where this unit is
located).
Zone 2 Outputs audio only to the separate room (ZONE 2).
Main/Zone 2 Outputs audio to both the main room and separate room.
 Preset Volume (Default Value: Main=Last / Zone 2=Last)
You can set the volume beforehand for playing back the Sonos Connect. You
can set volumes for the main room (where this unit is located) and separate
room (ZONE 2) respectively. Select a value from "Last" (Volume level before
entering standby mode), "-∞ dB", and "-81.5 dB" to "+18.0 dB".
• To use this function, set "Input Selector" beforehand.