User Manual

112
Setup
Source
Analog When giving priority to the input signal from AUDIO IN jacks
• This item can be selected only when the input to be set is
assigned to the AUDIO IN jack in the "Input/Output Assign" -
"Analog Audio Input" setting.
 Fixed PCM (Default Value: Off)
Select whether to x input signals to PCM (except multi-channel PCM) when
you select "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select" setting. Set
this item to "On" if noise is produced or truncation occurs at the beginning of a
track when playing PCM sources. Select "Off" normally.
• Each time the "Audio Select" setting is changed, the setting is restored to
"Off".
• The setting cannot be changed when "TUNER", "NET", "USB", or
"BLUETOOTH" input is selected.