Full Product Manual
12 PINNACOLO L’ARGILLA THERMAL CLAY GAS POWERED OVEN
CONNECTING TO GAS TANK
CONNECT THE PROPANE GAS TANK
1. The tank valve should be in the OFF posion.
2. Make sure the burner valve is in the OFF posion.
3. Inspect the valve connecons, port and regulator assembly.
Remove debris and inspect the hose for damage.
4. When connecng the regulator assembly to the valve, use
your hand to ghten the nut clockwise unl it stops. Use of
a wrench could damage the quick coupling nut and result in
a hazardous situaon.
5. Open the tank valve fully by turning the valve
counterclockwise.
6. Before lighng the oven, use a soap and water soluon to
check all connecons for leaks.
7. If a leak is found, turn the tank valve OFF, and do not use the
oven unl a local liquid propane dealer can make repairs.
DISCONNECT THE PROPANE GAS TANK
1. Turn the oven burner valve OFF and make sure the oven is cool.
2. Turn the liquid propane tank valve OFF by turning clockwise
unl it stops.
3. Detach the regulator assembly from the tank valve by turning
the quick coupling nut counterclockwise.
4. Place dust cap on tank valve outlet whenever the tank is not in
use. Only install the type of dust cap on the tank valve outlet
that is provided with the tank valve. Other types of caps or
plugs may result in leakage of propane.
This gas ng is clockwise. Make sure that the tank is completely
switched o and screw the regulator as far as possible into the gas
tank valve.
The tank to be used in:
Propane Capacies: 20 lbs (9.1 kg)
Tare Weight: 18 lbs (8.2 kg)
Length: 18 inches (457 mm)
Height: 13.9 inches (353 mm)
Diameter: 12.2 inches (309 mm)
Footring Diameter: 8 inches (203 mm)