L’ARGILLA THERMAL CLAY GAS POWERED OVEN OWNER’S MANUAL, USER GUIDE AND WARRANTY MODEL NO: PPO-8-08
WARNING Remove the protective cover on the ignitor before lighting. WARNING • T his instruction manual contains important information necessary for the proper assembly and safe use of the appliance. • Read and follow all warnings and instructions before assembling and using the appliance. • Follow all warnings and instructions when using the appliance. • Keep this manual for future reference. • If instructions or parts are missing, contact: sales@FireOneUp.com (1-877-288-1110).
CONGRATULATIONS! ON BECOMING A NEW MEMBER OF THE PINNACOLO FAMILY! WARNING EAD AND UNDERSTAND R INSTRUCTIONS PRIOR TO ASSEMBLY Thank you for your purchase! We know that you have many brands and products to choose from and we are honored to know that you have decided to take one of our products into your home and hope that you enjoy it. Pinnacolo Pizza Ovens are designed according to the strictest safety and performance standards for the North American market.
TABLE OF CONTENTS Product Information..................................................................................................................................................... 3 Table of Contents.......................................................................................................................................................... 4 Safety Legal Disclaimer..............................................................................................................................
SAFETY LEGAL DISCLAIMER • T he installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA 58; or Natural Gas and Propane Installation Code, CSA B149.1; Propane Storage and Handling, CSA B149.2. • F OR OUTDOOR USE ONLY! Shall not be used in a building, garage, or any other enclosed area. • This appliance is not intended to be installed in or on a boat.
PARTS EXPLOSIVE VIEW 6 PINNACOLO L’ARGILLA THERMAL CLAY GAS POWERED OVEN
PART LIST 1. Front Legs 2. Front Wheels 3. Support Frames 4. Rear Legs 5. Rear Wheels 6. Rear Support Frames 7. Shelf 8. Fixed Ring 9. Stove Rack 10. Oven Dome with Lighting Rod 11. Chimney 12. M8 Hexagon Socket Screws 13. M5 Philips Screws 14. Nut 15. Wrench 16. Allen Key M8 17. Allen Key M5 NO. PART NAME QTY NO.
PRODUCT DIMENSIONS 8 PINNACOLO L’ARGILLA THERMAL CLAY GAS POWERED OVEN
INSTALLATION STEP 1 STEP 2 Install the two front wheels (Part No. 2) on the two front legs (Part No. 1) respectively. Use a wrench (Part No. 15) and a M8 allen key (Part No. 16) to secure the screws. Install the two rear wheels (Part No. 5) on the two rear legs (Part No. 4) with screws (Part No. 13) and nuts (Part No. 14). Use a wrench (Part No. 15) and a M8 allen key (Part No. 16) to secure the screws. STEP 3 STEP 4 Install the retaining fixed ring (Part No. 8) to secure the gas tank.
INSTALLATION STEP 5 STEP 6 Install the 2 support frames (Part No. 3) on to the 2 front legs (Part No. 1). Install the 2 rear support frames (Part No. 6) on to the 2 rear legs (Part No. 4). STEP 7 STEP 8 Use a hexagon socket screws (Part No. 12) to secure the 4 support frames. Install the oven rack (Part No. 9).
INSTALLATION STEP 9 STEP 10 Install the oven rack (Part No. 9) to support frame with M8 hexagon socket screws (Part No. 12). The stand assembly is complete. Position oven dome (Part No. 10) on top of the shelf with door opening over the large wheels. STEP 11 STEP 12 Install the chimney (Part No. 11) on the oven dome, and twist the chimney counterclockwise to lock it to the base. The oven is ready for use. pinnacolopizzaovens.
CONNECTING TO GAS TANK CONNECT THE PROPANE GAS TANK 1. The tank valve should be in the OFF position. 2. Make sure the burner valve is in the OFF position. 3. I nspect the valve connections, port and regulator assembly. Remove debris and inspect the hose for damage. 4. W hen connecting the regulator assembly to the valve, use your hand to tighten the nut clockwise until it stops. Use of a wrench could damage the quick coupling nut and result in a hazardous situation. 5.
RECOMMENDED POSITION WARNING Do not store a spare LP gas tank on the shelf. WARNING • Please always keep the gas tank in upright position. • I f the appliance is not in use, the gas must be turned off at the supply tank. • T he tank used must include a collar to protect the tank valve. A STATEMENT 1. D o not store a spare LPG tank under or near this appliance; 2. Never fill the tank beyond 80 percent full; and 3.
LEAK TESTING GENERAL GAS FLOW CHECK Although all gas connections on the oven are leak tested at the factory prior to shipment, a complete gas leak check must be performed at the installation site due to possible mishandling in shipment, or excessive pressure unknowingly being applied to the unit. Periodically check the whole system for leaks following the procedures listed below. If the smell of gas is detected at anytime you should immediately check the entire system for leaks.
LIGHTING 1. Make sure burner knobs are turned to “OFF”. 2. For gas oven using a propane tank, slowly open the tank valve. 3. P ush and rotate the control knob to “HIGH”. You will hear the “snapping”, the burner should light and produce a good strong flame. The control knob can be turned up and down between the low and high settings to control the fire. TO LIGHT THE OVEN WITH MATCH 4. Gently hold the lit match close to the burner.
COOKING • T his oven will be hot during and after use. Use PINNACOLO HIGH TEMP GLOVES (PPO-6-05) for protection from hot surfaces or splatter from cooking liquids. 2. H igh heat cooks the best pizza. Please use PINNACOLO High Temp Gloves that are made to withstand high temperatures. When taking items such as hot pans out of the oven, the high heat may damage the delicate material of normal oven gloves, so make sure you have good quality insulated gloves like the PINNACOLO High Temp Gloves (PPO-6-05).
CARE INSTRUCTIONS PINNACOLO PIZZA OVENS will provide some of the best food experiences that you will have. HOW TO CLEAN THE OUTER SHELL? WHERE TO STORE THE OVEN? 2. Y ou can clean the stainless steel part with a soft cloth and stainless steel cleaner, just make sure the products you use are non-abrasive. 1. P izza oven must be completely dry and cool before attempting to move or store. We recommend storing indoors, out of direct sunlight for long-lasting use.
TROUBLESHOOTING MAINTENANCE BURNER WILL NOT LIGHT FLARE-UP Possible Cause: Possible Cause: 1. No gas flow. 1. Grease build up. 2. Coupling nut and regulator not fully connected. 2. Excessive fat in meat. 3. Obstruction of gas flow. 3. Excessive cooking temperature. 4. Disengagement of burner to valve. 4. Excess flour on the cooking surface. 5. Incorrect assembly. Prevention/Solution: 6. T he distance between the ignition needle and the nozzle is not suitable. 1. Clean oven. 2.
LIMITED WARRANTY Fire One Up Sales Inc., the importer and distributor of the PINNACOLO PIZZA OVENS brand of Outdoor Ovens. Fire One Up Sales Inc warranties the Stainless Steel ovens and their components, including the body, floor, venting system, factory finish, stand and door (hereinafter referred to as the Product) to be free of defects in materials and workmanship for a period of one (1) year from time of purchase.
By following the information within you can expect to ENJOY your PINNACOLO Pizza Oven and great tasting food, for many years to come! Don’t forget to share posts and stories on PINNACOLOPIZZAOVENS.COM FIREONEUP.COM © Copyright 2022 PINNACOLO Pizza Ovens are a trademark of Fire One Up Sales Inc.
