Operation Manual

242 Pinnacle Studio User Guide
The waveform and frequency buttons at the lower right of the Audio
Editor let you switch between these complementary displays at will.
The frequency spectrum breaks down the audio signals by
frequency bands, showing the sound level in each band.
Lower frequencies are on the left. Peak levels are shown as a
small box above each main bar for which a peak has been
detected in the past few seconds.
Controls for synchronous video
If you are editing video that has a synchronous audio track, both video
and audio editing facilities are available through the Video and Audio
buttons at the top of the window. While you are in the Audio Editor, a
video monitor panel is also available.
Video / audio switch
If video is available, a tab is provided at the top left of the screen for
switching to the Video Editor. For details on the controls available
when the Video tab is selected, please see
“Correcting video” on
page 145.