Installation Guide

Page2
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW ALL INSTRUCTIONS PROVIDED
CAREFULLY
Install to allow adequate access for maintenance and the
possibility of future servicing.
"An equipment grounding terminal is provided in the field wiring
compartment. To reduce the risk of electric shock, this terminal must be
connected to the grounding means provided in the electric supply panel
with a conductor equivalent in size to the circuit conductors supplying this
equipment"
FOR INDOOR USE ONLY.
INSTALL IN ACCORDANCE WITH THE MANUFACTURER'S INSTALLATION INSTRUCTIONS.
USE SUPPLY WIRES SUITABLE FOR 30A OC.
CONNECT ONLY TO A CIRCUIT PROTECTED BY A CLASS A GROUND FAULT CIRCUIT
INTERRUPTER.
CONNECT ONLY TO A BRANCH CIRCUIT PROTECTED BY AN OVERCURRENT
PROTECTION DEVICE RATED NOT MORE THAN 3
0 A.
BONDING LUGS USE COPPER CONDUCTORS ONLY.
SAVE THESE INSTRUCTIONS