User Guide

Chapter Site Settings
17 - 22
System Settings
DV, DVCPro and Render Format
Liquid Edition adapts itself automatically to an incoming DVCPro25 signal.
w If you want DVCPro25 both at input and output, set Render Format to DVCPro (avi or
dif).
w If you want to DV both at input and output, set Render Format to DV (avi or dif).
If you want to convert formats, select the appropriate Render Format. Examples:
w Input DV --> Output DVCPro25 --> Render Format DVCPro avi or dif)
w Input DVCPro25 --> Output DV -->Render Format DV avi or dif )
The two latter variants initiate a rendering process.
Inputs/Outputs Tab
On this tab, you can configure the inputs and outputs.
Video Inputs
w 1394 -
each availabe DV device is listed here with its manufacturer name and a number; if no
device is connected, it says so: No device.
The system receives this information directly from the Windows operating system, which
in turn checks all i.Link (DV, Firewire, IEEE 1394) connections of the computer.
If more than one device is connected, you can select one. The device you select here
is the
one that is controlled by the DV remote interface. It can be used in the Logging Tool for
clip logging and capturing of AV data to the system’s harddisks.