User Guide

Chapter Site Settings
17 - 5
Player Settings
Options
You can add TC data to the live input signal or use the supplied TC data of the signal.
1 Click the plus (+) symbol,
2 click Options,
3 and, in the right-hand section, double-click the current Val ue.
Choose one of three options:
w Custom - It defines that a TC value manually specified in the Logging Tool should be used
for generating timecode data. The timecode starts with the value entered in the Position
timecode field.
Start/stop the TC counter by clicking Play (toggle button).
See also
“Timecode Position Field (A)” on page 8-10.
w Time of day - The system time is used for generating timecode data. “Time of day” is only
guaranteed with a correctly set system clock.
TC count starts immediately after initialisation of the Logging Tool.
w Video - TC data embedded in the DV input signal. (VITC cannot be used.)
i.Link DV Devices (IEEE 1394)
i.Link DV is a name for devices connected and remote controlled via a DV interface. Other, more
or less synonomous names are Firewire or IEEE 1394 (the latter is the official standard name).
This interface needs to be integrated in your computer.
With the exception timing parameters there are no further settings to define (
page 17-8).