User Guide

Chapter Basics
6 - 14
Tour de Pinnacle Liquid
Select Video Output (only Pinnacle Liquid with analog inputs/outputs)
To quickly toggle between S-video and CVBS outputs (None means inlay only.
Liquid Edition PRO only: The DV output via IEEE disabled is during timeline edit-
ing. Using the output selection button in the taskbar you can direct video output to a
video monitor connected to the breakout box. When you call the Record to Tape tool,
IEEE output is automatically enabled. The analog outputs will be disabled while the
recording continues.
Audio Tool
Click this icon to open the Audio Tool, which you can use to control outgoing
levels.
The adjacent rows of squares serve as an auxiliary level. The two uppermost segments in particu-
lar are displayed in red to warn of an overload. For related information, refer to
“Audio Tool” on
page 11-17.
Digital or analog audio scrub: Right-click
on the icon to open a shortcut menu. Select either one
of the two modes, then enable scrub by pressing the
SCROLLLOCK key on your keyboard: In the
icon an A or D indicates active scrub mode, and the type.
For further information on this subject see
“Audio Scrubbing - Digital or Analog” on page
11-14.
View Switcher
To access several views for the Pinnacle Liquid interface, click the View Switcher (eye icon) and
select an available desktop view (
“Desktop Views” on page 6-15).