User Guide

Chapter Output
15 - 8
Record to Tape
Activate this function if you want to record a special leader, color bars or other test signals before
the actual Sequence.
As an alternative to Dump To Tape, with this method you can quickly and directly output
a Sequence to an uncoded tape by selecting it with Select Stripe Sequence. The Sequence
does not have to be on the Timeline. The timecode is taken from the Start Timecode field
and the Sequence’s original timecode is ignored (RS 422 control only).
Additionally, in contrast to Dump To Tape, the tape is rewound to the beginning for
recording.
Set Start Timecode (RS 422 only)
Enter a timecode start value in the tc field (available only with RS 422 remote controlled device
connected).
Start Striping
Click Start. A dialog box opens.
Make sure that the timecode generator on
your recorder is set to Preset (if applicable).
w Click OK or the Eject button to change the tape
and then OK. The recorder winds the tape to the
beginning and starts to code at the time speci-
fied under Start Timecode.
w Click Abort to stop coding.