User Guide

Chapter Finish
11 - 220
Color Correction Editor
center mouse button (or mouse wheel) to move the center of the luminance range.
Suitable diagnostic display: Cube.
w Saturation range -
Hold down the
SHIFT key and
left mouse button to move the lower limit;
right mouse button to move the upper limit;
center mouse button (or mouse wheel) to move the center of the saturation range along
the radius.
Suitable diagnostic display: Vector .
w Hue range -
Hold down the
ALT key and
left or right mouse button to enlarge/reduce the hue range (segment);
center mouse button (or mouse wheel) to rotate the color angle.
Suitable diagnostic display: Vector .
w Move the center -
You can move the center of the selected color along the C
r
and C
b
axes. The selection
range in the Vector Display moves accordingly.
Selecting a Target Vector
Using the Pipette, you can select a color from a Reference Source ( page 11-202). Note: This selects
the target Vector , i.e. the color to be achieved as a result of the correction. The lower of the two
color fields then changes to the color defined in the Reference Source.
Follow the procedure described in
“Defining Vectors - Selective Color (A)” on page 11-216.