User Guide

Chapter Finish
11 - 133
Effects
Backside Image parameters
The parameters in this group define the how the back of the turned page will be displayed. In the
default configuration, the back of the image is the same as the front but reversed left to right.
Flip horizontal/vertical
Activate these functions to flip the back of the image vertically and/or horizontally.
Color
You can also apply a color to the image back. Click the highlighted square next to the slider to
open the Color Picker dialog box. The slider alters the opacity of the color layer: 0% is transpar-
ent, 100% is opaque. Here, too, you can select a color using an Eyedropper (see description under
Front Light).
Highlight
Select this option to activate a light accent on the outside (back) of the bend and use the slider to
adjust the intensity of the accent. Again, you can determine the color of the light (see description
under Front Light).
Highlight direction
Changes the position of the highlight on the outside of the bend. Move the slider to shift the high-
light closer to or away from the corner of the image (default = 50).