User Guide

Chapter Finish
11 - 103
Effects
Size
Use this function to control image size.
w Adjusting settings in menu:
Move the Width and Height sliders to a particular position/value between 0 and 400 %. If
you want width and height to be controlled simultaneously (aspect ratio), click the Lock
button. Click Original Size to restore the object in the Effect Viewer to its original size.
Click Fit to full Size to adjust a smaller or larger image to the size of the Effect Viewer.
w Adjusting settings directly in video inlay:
Click the Size button. Drag clips directly in the Effect Viewer for rough sizing.
7 SHIFT+click to disable the Lock function and modify width and height by drag-
ging the mouse up/down or left/right.
Rotation
Use this function to control rotation.
w Adjusting settings in menu:
Move the Angle knob to a value between 0° and 360° to set the spin angle. With Spins
specify the required number of rotations within the course of the effect (0-100). Activate
either Clockwise or Counter Clockwise rotation.
w Adjusting settings directly in video inlay:
Click the Rotation button. Drag clips directly in the Effect Viewer to define rotation.
7 Hold CTRL or SHIFT keys while dragging to rotate the image in 90 or 45 degrees
increments.
With a Spin of 0, a clip rotates until it reaches the position specified under Angle. To spin a
clip more than one full rotation, but less than an additional full rotation, set the required
additional amount under Angle. For example, if you start with an angle of 0° and set Angle
to 180° and Spins to 3, the clip will rotate three and a half times (3 x 360° and 1 x 180°).