User Guide

Chapter Finish
11 - 29
Audio Postproduction
Audio Key Frame Tooltip
When moving Key Frames, a small box appears next to the mouse pointer. It indicates:
w the horizontal displacement of the Key Frame position (in +/- mm:ss:ff)
w the quantitative change (in the case of volume lines +/- dB, in the case of pan +/- 50%, i.e.
left/right).
You can move horizontally (only to the neighboring Key Frame) and vertically (within the maxi-
mum values).
Moving Sections between Two Key Frames
Using the Mouse
To m ove a s ec t i o n b e tw e e n t w o Key Frames, position the mouse pointer on the Volume Line
between the two Key Frames and press the
SHIFT key. The mouse pointer turns into a short hori-
zontal line. Now you can move the area between the Key Frames. This is useful, for example, if
you have faded audio in and out in a clip and want to adjust the entire segment between two Key
Frames.
Using the Fader
This can be done in a similar way by using the respective Fader: set the Playline between the Key
Frames that are to be increased by the same value, hold down the
SHIFT key and move the Fader
up and down. As soon as the Playline is located on a Key Frame, the line located to the right of it is
edited.