User Guide

Chapter Edit
10 - 78
Video Editing
Tip: What do you do if...
... you are editing and you notice that a clip you digitized is too short? Easily solved! Sup-
ply the source tape (Reel), select Batch Digitize from the clip shortcut menu to display the
Batch Digitize dialog box and enter a generous Handle Length.
After digitizing is complete, return to the Timeline and select Expand Clip(s) from the clip
shortcut menu. You can now extend the clip you just digitized at the mark-in and mark-
out.
Clip Undo
Clip Undo cancels the last action(s) you performed on a clip on the Timeline. You can cancel up to
64 steps.
Clip Redo
Clip Redo cancels the last undo(s) you performed. You can cancel up to 64 undos.
Match Frame (To Tape, Project or Clip)
Match Frame To Clip
Loads the corresponding original of a Timeline clip into the Source Viewer.
1 Position the Playline on the desired image.
2 Right-click the clip to open the shortcut menu.
3 Select Match Frame.
The Playline position in the Source Viewer corresponds to the position of the Playline in the clip
on the Timeline.