User Guide

Chapter Setup
3 - 4
Installation
Installation
This section contains the following information:
System Requirements
page 3-4
Installing the PCI interface card page 3-6
Configuring/Connecting A/V HD Subsystem page 3-9
Configurations and Software Installation page 3-13
After the Installation page 3-16
Connecting Liquid Control page 3-18
InTime board installation page 3-19
RS 422 device control setup page 3-21
System Requirements
The system requirements described here are the minimum requirements.
No guarantee can be given for the proper operation of
Liquid Edition if these minimum
requirements are not met. (Some recommendations given in parenthesis.)
Note: With minimum requirements only limited realtime capabilities.
Contact your Pinnacle Systems dealer for more information on certified (tested) reference sys-
tems.
OS
Microsoft Windows XP (preferred) and Windows 2000 (SP3)
IEEE 1394 Interface (i.Link/Firewire)
Generic OHCI interface or dedicated DV interface (PCI, PCMCIA)
CPU
Single or dual 1 GHz (Dual> 1.8 GHz)