User Guide

Chapter Administration
9 - 72
The Object
The Restore to Default button shown here resets all the parameters to zero.
Red, green, blue and brightness (luminance) can be controlled separately. Nevertheless, a change
in a color channel also causes a change in luminance. Proceed as follows:
1 Select Black, Gamma or Gain (shadows, midtones or highlights).
2 Drag one of the color bars or the luminance bar to the desired position or enter a value
from -255 to 255. Single-click the small button next to a bar to reset it to the original
value.
3 The effect is instantly visible in the video inlay.
4 A blue five-point star appears on the clip Picon in the Rack indicating that Color Correc-
tion attributes exist for the clip.
5 To deactivate the modified attributes, uncheck the box below; for more info see the sec-
tions on Attributes,
“Tab: Special” on page 9-80 or “FX Properties” on page 9-81.
6 Pinnacle Liquid displays the modifications in real-time.
CCIR 601
Limits the image output signal to the values permitted by the CCIR-601 Standard by clipping any
exceeding components.
Work only in CCIR
This option confines values within the limits of CCIR 601, meaning that illegal colors cannot
even be created during correction (rather than only be clipped at the output).