User Guide

Chapter Input
8 - 40
Logging and Digitizing (Capture)
Using the Log Button
1 Start the digitizing process using one of the methods described above ( page 8-37).
2 Click the Log button once to set a mark-in and again to define a mark-out and insert the
subclip in the Rack and on the Timeline.
3 You can repeat the procedure described in #2 as long as the digitizing process is still run-
ning.
4 To terminate, click the Digitize button again. The master clip is also stored in the Rack.
A flashing Subclip symbol indicates the active subclip mode. This is also to remind you
that any text inputs are going to be stored with the next
subclip defined.
(Re-)Digitizing Individual Clips
You can transfer a clip directly from a Rack to the video inlay in the Logging Tool using drag &
drop. The clip data appears in the timecode fields.
w A new clip and a new Media File are generated in a subsequent digitizing operation. The
original clip data and media data is retained.
w If you want clip and the media data overwritten, use the Batch Digitize function
(
page 9-87).
Batch Digitize
Batch Digitize permits the automatic digitizing of clips that have already been logged. The system
controls the player. For more information, see
“Batch Digitize (Batch Capture)” on page 9-87.