Home Theater Server User Manual

Chapter 3: Installation and Setup

MMG Installation, Setup, and Operations Guide

Preset 4: HD 420 IBBP

1. To setup a codec, go to Edit menu > Control Panel and select Site Tab.

2. Double click Codec Presets.

3. Select the “MPEG-2 MP@HL (M2V)” codec as starting point. Click the two plus symbols on

the right to duplicate this preset.

Figure 3-44: Codec Presets for HD

4. Type a descriptive name for the preset you want to create in the textfield. For this example,

enter HD420 @ 80MBit/s.

Figure 3-45: HD 420 settings

5. To edit the Codec Properties click the top Edit button. In Codec Properties select a maximum

Bitrate of 80 MBit/s. Keep the I-Frame only and 4:2:2 box unchecked. Click the accept icon.

6. Click OK in the Fuse Sequence dialog that appears (see Figure 3-39 on page 38).

Setup the Codec Preset 4 in the timeline

1. To setup a Codec Preset right click a empty space of the timeline and select Timeline

properties... from the drop-down menu (see Figure 3-34 on page 35).