Use and Care Manual

USER MANUAL #CL-4SL7003-TP | 44” 7000 LUMEN TREADPLATE SHOP LIGHT
USER MANUAL #CL-4SL7003-TP | 44” 7000 LUMEN TREADPLATE SHOP LIGHT
PRODUCT INSTALLATION INSTRUCTIONS:
1. Attached the “S Hook” (A) to the LED light
(Diagram A). Repeat this on the other side.
2. Attached the “Hanging Chain” (B) to the “S Hook” (A)
(Diagram B). Repeat this step on the other side
3. Hang the Hanging Chain on the pre-installed “Screw
Hook” (C). Adjust to the desired height and
guarantee the product is leveled. It is essential
to keep the product at a minimum of 3” from
the ceiling.
4. For this product, you can link up to 6 UNITS.
Simply plug the power cord directly into the
adjacent unit(s).
5. Plug the main light’s AC power cord into the AC
outlet. Pull the chain to power the product ON
and again to power the product OFF.
If you have questions or missing parts, please contact our customer care at 1-888-745-4837 If you have questions or missing parts, please contact our customer care at 1-888-745-4837
WARNING:
RISK OF ELECTRICAL SHOCK.
TO AVOID ELECTRICAL SHOCK, MAKE SURE TO TURN
OFF THE MAIN POWER SOURCE OR DISCONNECT POWER
DURING THE INSTALLATION OR SERVICE
OF THIS PRODUCT
B
A
LINK UP TO
6 UNITS
PREINSTALLATION INSTRUCTIONS:
Before beginning any installation, select your location.
Measure between the two “S Hook” attachment holes on
top of the light to determine the distance between each
hanging chain. Next, determine your mountain method.
If you or a professional electrician is mounting into wood, it
is recommended to use Screw Hooks (C) as in Diagram 1.
If mounting into drywall, it is recommended to use Screw
Hooks (C) and Toggle Bolts (D). Screw the Screw Hook into
the Toggle Bolt. Then drill a 1/8” hole into the drywall.
Pinch the buttery ends at and push through the drywall
hole. The Toggle Bolt will expand behind the drywall as in
Diagram 2. Repeat for the other side.
1
2
A B C D
HARDWARE INCLUDED:
Part Description Quantity
A “S” Hook 2
B Hanging Chain 2
C Screw Hook 2
D Toggle Bolt 2
It is up to the purchaser or a professional electrician to determine the best area to
install. The manufacturer is NOT responsible for improper installations.