User's Manual

PINEAPPLE TECHNOLOGY, INC. V.5 . ETHERNET WEB PAGE CONTROL AND MONITORING
DXDPRO-10U MODULATOR MANUAL
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION
38
V.5 . DXDPRO-10U ETHERNET WEB PAGE CONTROL AND MONITORING (Continued)
D. WEB SERVICE OPERATION
3. Web Service - Operation Principle
Parameter Control For Interface Point
Access To System Parameters
A number of system oriented parameters can be accessed by left-clicking the [System] button located in the
lower-left corner of the web page. To access a specific system (for example saving or loading a device preset)
proceed as follows:
1. Left click the [System] button. A menu including the various choices will now open up above the [system]
button.
2. From the menu select the required function (for example ‗Preset‘ management) by left-clicking the point in the
menu.
3. The corresponding control panel will now open up in the lower section of the screen in place of the three
regular control panels.
4. When the setting of interest has been verified/changed as required the ‗system‘ control panel is closed again
by left clicking the [X] in the top-right corner of the panel.
4.
When the Interface
point is placed in the
desired panel (left,
centre or right),
release the left
mouse key.
The new control
panel will now
automatically open