User's Manual

PINEAPPLE TECHNOLOGY, INC. V.5 . ETHERNET WEB PAGE CONTROL AND MONITORING
DTXPRO-10U OPERATING AND SERVICE MANUAL
33
V.5 . DXDPRO-10U ETHERNET WEB PAGE CONTROL AND MONITORING (Continued)
D. WEB SERVICE OPERATION
2. PT 2000 Web Service Main Page
3. Web Service - Operation Principle
Control panel configuration
The control panel (lower section of the screen) is easily adapted to the current activity by dragging-and-
dropping the required functional block from the upper section of the screen to the lower section of the screen.
Control panels for three functional blocks can be open simultaneously in the lower section.
The ‘Functional Blocks’ in the upper section of the screen can be subdivided into three types:
• Main function block: a main function block holds the top level control and status parameters for a
specific function. These blocks are identified by the blue label ‘attached’ above the block (white text on
blue background). In the below example screen print main functional blocks exist for the sub-functions
Reception, Input, Mode, Pre-Correction, Output and Reference.
• Specific function block: a specific function block holds control and status functions for a specific
function within a ‘Main functional block’. In the below example screen print it can for example be noted
that the Reception main block contains specific functional blocks for the tuner and the channel filter
functions. Likewise, it can be seen that the mode block contains specific functional blocks for the HP
Coder, LP Coder, OFDM and SFN functions.
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION