User's Manual

PINEAPPLE TECHNOLOGY, INC. V.5 . ETHERNET WEB PAGE CONTROL AND MONITORING
DTXPRO-10U OPERATING AND SERVICE MANUAL
THE INFORMATION PROVIDED HEREIN IS PINEAPPLE TECHNOLOGY INCORPORATED PROPRIETARY INFORMATION AND
CANNOT BE COPIED OR DISTRIBUTED WITHOUT PRIOR AUTHORIZATION
30
V.5 . DXDPRO-10U ETHERNET WEB PAGE CONTROL AND MONITORING (Continued)
C. IP ADDRESS CONFIGURATI0N (Continued)
2. IP Configuration Over Ethernet (Terminal)
The PT2000 Terrestrial Gateway product can be configured for either static or dynamic IP address operation.
The factory default setting for the unit is:
• Address management: DHCP = OFF (static IP address)
• Default IP: 192.168.168.168
• Default Mask: 255.255.0.0
• Default gateway: 192.168.1.1
Provided that the current IP setting for the unit is known (IP address and network mask) it is possible to carry
out further query of IP settings by connecting a PC to the Ethernet port. (The PC must, of course, be
configured with IP settings that are compatible with the address space currently set for the PT2000 Terrestrial
Gateway product).
3. IP configuration over Ethernet (Web Service)
The factory default setting for the unit is:
• Address management: DHCP = OFF (static IP address)
• Default IP: 192.168.168.168
• Default Mask: 255.255.0.0
• Default gateway: 192.168.1.1
Provided that the current IP setting for the unit is known (IP address and network mask), it is possible to carry
out further query of IP settings by connecting a PC to one of the three RJ45 management ports of the PT2000
Terrestrial Gateway product (the PC must of course be configured with IP settings that are compatible with the
address space currently set for the PT2000).