User's Manual

THESE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PINEAPPLE TECHNOLOGY, INC.
DTC25U Operating and Service Manual
II – TRANSCODER SPECIFICATIONS
II – DTC25U SPECIFICATIONS
Power Output ………………………… 25W Average
RF Output Impedance………………… 50 ohms
Frequency Range……………………… 470 – 806 MHz
Frequency Stability…………………… ± 1,000 Hz
Error Vector Magnitude………………. 4% Maximum
Digital Signal to Noise……………….. 27 dB
Group Delay with Output Filter………. ± 25 ns
Harmonic Output………………............ -50 dB
Spurious Output………………………. -50 dB
Spectrical Mask with Output Filter…... -46 dB @ Channel Edge
-85 dB ± 6 MHz
Ref. channel edge below average transmitted power
(Watts/5.4 MHz)
Phase Noise……………………………. -106 dBc/Hz @ 20 kHz
Operating Temperature……………….. -10 to +35 degrees Celsius Ambient
+14 to +95 degrees Fahrenheit Ambient
Altitude……………………………….. 5,000 ft without additional cooling
Cooling Requirement…………………. Built in, except where noted
Connectors……………………………. F Connector Input, N Connector Output
Power Consumption…………………… 500W maximum
AC Line Voltage……………………… 85 – 120 VAC Single Phase
Weight………………………………… 100 lbs
Dimensions…………………………… 21” x 16” x 24” (W x H x D) Standard
Page 3