MSDS

GUANGZHOU TIANQIU ENTERPRISE CO., LTD.
Lithium Button Cell
Page 3 of 8
Date Prepared: 2014/1/1
or dry sand.
Special Fire Fighting Procedures: In case of fire in an adjacent area, use water, co
2
or dry
chemical extinguishers if cells are packed in their original container since the fuel of the
fire is basically paper products. for burning bulk quantities of unpacked cells use class
“ D” fire extinguisher. in this case, do not use water.
Fire fighters should wear self-contained breathing apparatus.
6. Accidental Release Measures
Precautions: Avoid direct contact with the leaking or ruptured cells. Avoid short circuit.
Methods for Clean Up: Care for well-ventilated conditions. Recycle or dispose of the
materials in an appropriate way.
7. Handling and Storage
Precaution: Handing and transfer the products carefully, make sure the packing always in
good condition. Damaged packing may cause cells contact together, in this case cells may
short circuit or improperly connected, it cause cells venting, leaking or exploding.
Storage: Store in a dry, cool and well-ventilated area.
8. Exposure Control/Personal Protection
Exposition/Technical Measures: Atmospheric vapor concentrations must be minimized by
adequate ventilation.