Datasheet
Table Of Contents
- Product Datasheet
- General Description
- Key Features
- Working range of 15 to 35 mm
- No lens focusing required during lens mounting process
- Power consumption of 6 mA typical @ run mode (chip only)
- 16-bits motion data registers
- Motion detect pin output
- Internal oscillator – no clock input needed
- Applications
- Devices that require near field motion detection, e.g Robot Cleaners
- Key Parameters
- Ordering Information
- 1.0 Signal Description
- 2.0 Operating Specifications
- 3.0 Mechanical Specifications
- 4.0 System Level Description
- 5.0 Registers
8
PixArt Imaging Inc.
PAA5100JE Product Datasheet
Optical Tracking Chip
Version 1.00 |25 July 2018
PixArt Imaging Inc. http://www.pixart.com
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
Mechanical Specifications
3.1 Package Marking
Refer Figure 1. Pin Configuration for the code marking location on the device package.
Table 7. Code Identification
Code
Marking
Description
Product Number
P5100
Part number label
Lot Code
YWX
Y: Year
W: Week
X: Reserved as PixArt reference
3.2 LGA Package Outline Drawing
CAUTION: It is advised that normal static discharge precautions be taken in handling and assembling of this component to
prevent damage and/or degradation which may be induced by ESD.
Figure 2. LGA Package Outline Drawing