Datasheet

5
PixArt Imaging Inc.
PAA5100JE Product Datasheet
Optical Tracking Chip
Version 1.00 |25 July 2018
PixArt Imaging Inc. http://www.pixart.com
All rights reserved. Any portion in this paper shall not be reproduced, copied, or transformed to any other forms without permission.
The recommended external illumination to use with PAA5100JE is White LED with the part number LTW-216TS5. The
datasheet for this LED is attached with this document.
Table 4. Characteristics of LTW-216TS5 at T
A
= 25°C
Description
Symbol
Min.
Typ.
Max.
Unit
Notes
Power Dissipation
70
mW
DC Forward Current
20
mA
Peak Forward Current
100
mA
1/10 duty cycle, 0.1 ms pulse
width
Reverse Voltage
V
R
5
V
Reverse Current
I
R
10
uA
V
R
= 5 V
Forward Voltage
V
F
2.65
3.20
V
I
F
= 5 mA
Note: Refer to LITE-ON’s latest datasheet for up-to-date product characteristics.
2.3 DC Characteristics
Table 5. DC Electrical Specifications
Parameters
Symbol
Min.
Typ.
Max.
Unit
Conditions
Supply Current
I
DD_RUN
6
mA
Average current (chip only)
No load on MISO, MOTION.
Power Down Current
I
PD
12
uA
Input Low Voltage
V
IL
0.3*V
DDIO
V
SCLK, MOSI, NCS
Input High Voltage
V
IH
0.7*V
DDIO
V
SCLK, MOSI, NCS
Input Hysteresis
V
I_HYS
100
mV
SCLK, MOSI, NCS
Input Leakage Current
I
LEAK
± 1
± 10
uA
V
in
= V
DDIO
or 0V,
SCLK, MOSI, NCS
Output Low Voltage
V
OL
0.45
V
I
OUT
= 1mA, MISO, MOTION
Output High Voltage
V
OH
V
DDIO
- 0.45
V
I
OUT
= -1mA, MISO, MOTION
Note: All the parameters are tested under operating conditions: V
DD
= 2.0V, V
DDIO
= 2.0V, T
A
= 25°C.